05/31/20
Copyright © 2020, Sargen
t Manufacturing Company
, an A
SS
A AB
LO
Y G
roup company
. All right
s reser
ved
.
Reproductions in whole or in par
t without express writ
ten permission of Sargen
t Manufacturing Company is prohibited
.
SE LP10 Mortise Lock
A8113H • 800-810-WIRE (9473) • www.sargentlock.com
13
Inside of Door
4 Install Lock Body
Fig. 4A
A. First insert lock body wire harness into the mortised area and out of the inside cylinder hole (Fig. 4A).
B. Insert mortise lock body into mortise door preparation, continuing to feed wires from lock body through
the non-cylinder (inside) hole of the door preparation.
C. Hold lock body loosely in place with (2) lock body screws (wood or metal depending on type of door).
NOTE: Do not completely tighten screws at this time.
(2) #12-24 x 1/2”
Flat Head Philips
Screws (Metal Doors)
(2)#12 x 1-1/4” Flat
Head Wood Screws
(Wood Doors)
Fig. 4B
