Roto Safe
Eneo
Note
Incorrect installation, maintenance or
operation can lead to hazardous situations.
This extract is not a replacement for complete
documentation. Failure to observe this
documentation discharges the hardware
manufacturer from their liability.
u
Note the complete installation, mainte-
nance and operating instructions (IMO).
The complete documentation for this extract is as
follows:
■
Roto Safe Eneo installation instructions:
C | CC | CF: IMO_438
Control Unit: IMO_288
■
Roto Safe Eneo brief instructions:
Power supply unit specifications (third-party
product): SUG_3
General information: SUG_9, SUG_10
■
Connection diagrams
Roto Safe Eneo: IMO_310
DANGER
Risk of death caused by electric
shock
Current can lead to fatal injuries.
u
Installation and maintenance work may
only be carried out by qualified electri-
cians.
u
Observe and comply with the respective
national regulations (in Germany VDE
0100 and others).
u
When laying the network connection
cable on-site, all-pole safety isolation
must be established.
u
Only carry out work when the power
supply is disconnected.
Technical data
Roto Safe Eneo drive
Voltage
24 V DC (±5%), 2.5 A, SELV output voltage
according to EN 60950-1
Continuous current
consumption
25 mA
Current consumption
1.5 A (peak 2.3 A)
Relative air humidity
≤ 93%
Temperature
–25 to +60 °C (transport –25 to +70 °C)
Output relay load
Max. 40 mA, flyback diode for inductive load
present internally
Standards
EN 60 730-1,
EN 50090-2-2
Low Voltage Directive complied with,
CE conformity
Cable junction
(on the sash side)
Max. voltage
48 V DC
Max. current
3 A
Line
LiF9Y11Y, six-pole version,
Ø 4.9 mm, grey
Line length on the connector
side
4 m
Degree of protection in
accordance with DIN 40050
IP67 (when inserted)
Temperature when idle
–40 to +75 °C
(transport –5 to +50 °C)
Cores
0.34 mm
2
(white, green, brown,
yellow, pink, grey)
Power supply unit
DC voltage
24 V (output)
Rated current
2.5 A (output)
Voltage adjustment range
21.6 to 26.4 A (output)
Voltage range
88 to 264 V AC, 124 to 370 V DC (input)
Frequency range
47 to 63 Hz (input)
Temperature
–20 to +60 °C
Relative air humidity
20% to 93%
INFO
If a different power supply unit is used,
ensure that it has 24 V and 2.5 A at the
output (see SUG_3).
Roto Safe Eneo
Subject to change.
Roto Safe Eneo
SUG_11_EN_v0
·
04 / 2019
· 1
