05/31/20
Copyright © 2020, Sargen
t Manufacturing Company
, an A
SS
A AB
LO
Y G
roup company
. All right
s reser
ved
.
Reproductions in whole or in par
t without express writ
ten permission of Sargen
t Manufacturing Company is prohibited
.
SE LP10 Mortise Lock
A8113H • 800-810-WIRE (9473) • www.sargentlock.com
11
Left Hand
Hinges Left.
Open Inward.
“LH”
Left Hand
Reverse Bevel
Hinges Left.
Open Outward
“LHRB”
Right Hand
Hinges Right.
Open Inward.
“RH”
Right Hand
Reverse Bevel
Hinges Right.
Open Outward
“RHRB”
A. Verify Hand and Bevel of Door
Stand on outside of locked door when determining door hand.
Prepare door according to appropriate template. If necessary, refer to website
www.intelligentopenings.com
.
• Prior to installation, make sure all holes are free of burrs, debris, and sharp edges.
• If doors are not properly reinforced per ANSI 115.2, commercially available reinforcements
should be installed.
• Templates:
o Field Template: A8123 and A8129 (ships with product).
o Door Manufacturer’s Template: 4702 metal and wood door.
Fig. 1A
Outside of Door
Inside of Door
Fig. 1B
(Wood Door Shown)
Installation Instructions
7
1 Door Preparation
B. Door Preparation
Inside Wire Hole
Thumb Turn Hole
Lever Handle Hole(s)
Mortise
Area
Outside Cylinder Hole
(70/71, 72/73, 80/81,
82/83 functions only)
Lever Handle Hole(s)
Pre-drilled and/or
Tapped Holes (2 Places)
Pre-drill Holes (2 places)
Pre-drill Holes (4 places)
Hole for Reader and
ElectroLynx cables
Raceway for Power and
Access Control
Raceway for Power and
Access Control
