25
EN
Configuration
Configure doors
Prerequisite
The configuration to be edited is open and the cross-classified table (Fig. 7, page 23)
is displayed (“Load a system configuration”, page 30).
Configure doors
1 Click the row header Door .
The
CMC connector
dialogue is displayed.
2 Click
The
CMC connector
dialogue with a list of the CMC doors is displayed.
3 Edit the table displayed.
The unique UIDs of the components in the escape route are transferred
automatically later.
3.1 Assign informative designations for the CMC doors.
3.2 Enter the unique IP addresses.
The IP addresses incl. IP mask and IP address of the gateways can be
obtained from the local IT department.
4 Save the configuration.
· Click or press System/Save or
or
or
· Click or press System/Save as or
or
.
You have configured the addressing of the CMC doors.
You have edited and saved a configuration.
Edit data
Don't forget
to save
F4
F5
Summary of Contents for Effeff ePED 1386CMC
Page 31: ...31 EN Configuration...
