24
EN
Configuration
Configure CMC boxes
Prerequisite
The configuration to be edited is open and the cross-classified table (Fig. 7, page 23)
is displayed (“Load a system configuration”, page 30).
Configure doors
1 Click column header Box <no.> .
The
CMC box
dialogue is displayed.
2 Click
The
CMC box
dialogue with a list of the CMC boxes is displayed.
3 Edit the table displayed.
The unique UIDs of the components in the escape route are later transferred
automatically.
3.1 Assign informative designations for the CMC boxes.
3.2 Enter the unique IP addresses.
The IP addresses incl. IP mask and IP address of the gateways can be
obtained from the local IT department.
4 Save the configuration.
· Click or press System/Save or
or
or
· Click or press System/Save as or
or
.
You have configured the addressing of the CMC boxes.
You have edited and saved a configuration.
Edit data
Don't forget
to save
F4
F5
Summary of Contents for Effeff ePED 1386CMC
Page 31: ...31 EN Configuration...
