Step 4
Use Correct Spindle Orientation
Inside Face of
Door
MUSÉO
STANDARD
Good Bad
Lever
Lever
Fig. 4b
Step 5
Align adjustment bolt with threaded hole in lever
Adjustment bolt needs
Adjustment bolt needs to be
unthreaded.
Adjustment bolt fully
aligned.
to be threaded in farther.
Step 6
Notes:
• Unthread adjustment bolt approximately four turns for a
good starting point (After being fully tightened).
• Make sure O/S lever is fully inserted into adapter plate
before aligning adjustment bolt.
6) Installation Instructions (Continued)
Fig. 4a
11
EcoFlex
™
Electrified Mortise Locks (NAC-)
with High-Security Monitoring Options
Installation and Wiring Instructions
Copyright © 2020, ASSA ABLOY Access and Egress Hardware Group, Inc.
All rights reserved. Reproduction in whole or in part without the express
written permission of ASSA ABLOY Access and Egress Hardware Group, Inc.
is prohibited.
