5
Models
The Besam SW200i operator can be surface mounted or concealed installed. These two versions
can be used in the following installations:
•
Single doors
•
Double doors (two operators)
•
Double egress doors (two operators)
The operators are non-handed and not dependent on the hinges. The operators suit both pushing
and pulling arm systems.
5.1
Single operator, surface mounted
The product is delivered complete with back plate, control unit, end plates and cover. Length
including end plates, L = 39.5” (1003 mm).
Pushing arm system shown. Other lengths are optional.
L
5.2
Double operator, surface mounted
Note: Consult Product Order form for availability
The product is delivered complete with back plate, control unit, end plates and cover. Cover
length L is optional.
Two operators can be mounted under the same cover to open one door each. Pushing and pulling
arm system shown (double egress).
It is also possible to use two pushing or two pulling arm systems.
L
1007718-US-3.0
Issue 2012-06-27
14
5 Models
Summary of Contents for Besam SW200i US
Page 26: ...Product label P N 1008999 1007718 US 3 0 Issue 2012 06 27 26 9 Options ...
Page 38: ...11 1 2 PULL PAS arm system 1007718 US 3 0 Issue 2012 06 27 38 11 Mechanical installation ...
Page 51: ...12 3 How to route the cables 51 Issue 2012 06 27 1007718 US 3 0 12 Electrical connection ...
Page 81: ......