English
GREAT BRITAIN •
customer service
tel:
020 8247 9300
internet
www.clasohlson.co.uk
postal
10 – 13 Market Place, Kingston Upon Thames, Surrey, KT1 1JZ
Ver
. 20180628
Freestanding Letter Box
Art.no 31-8563
Model TX009PB-CL1
Please read the entire instruction manual before using the product
and save it for future reference. We reserve the right for any
errors in text or images and any necessary changes made to
technical data. If you have any questions regarding technical
problems please contact our Customer Services.
Assembly
Installation raised off the ground
1. Lay the letter box on its side
and unscrew the 4 bolts
holding the baseplate and legs
in place. The legs are attached
on the inside of the letter box
when sold. Remove the legs
and the baseplate.
2. The letter box can either
be installed raised up off
the ground on the legs or at
ground level.
1. Attach the four legs to the baseplate.
2. Dig a 30 cm deep hole in the ground where the letter box
is to be located.
3. Fill the hole in the ground with concrete.
4. Lay a couple of planks over the hole.
5. Straddle the baseplate over the planks so that 2/3 of
the legs stick down into the concrete.
6. Use a spirit level to check that the baseplate is level.
7. Leave the concrete to dry for 24 hours before removing
the planks.
8. Undo the 4 screws on the baseplate and place the letter
box onto it.
9. Screw the letter box onto the baseplate from the inside.
4. Place the concrete slab and baseplate construction into
the hole and fill the hole with sand and soil.
5. Undo the 4 screws on the baseplate and place the letter
box onto it.
6. Screw the letter box onto the baseplate from the inside.
7. Fit the sloping shelf at the bottom of the letter box.
Disposal
This product should be disposed of in accordance with
local regulations. If you are unsure how to proceed,
contact your local authority.
Specifications
Size
Letter box: 43 × 36 × 112 cm (w × d × h)
Mail chute: 37 × 28 × 11 cm
10. Fit the sloping shelf at the bottom of the letter box.
Installation directly on the ground
1. Attach the four legs to the baseplate.
2. Dig a 30 cm deep hole in the ground where the letter box
is to be located.
3. Bolt the legs onto a concrete slab.
