8
P/N LT-503200 Rev B
Install Exterior Escutcheon and Interior Mounting Plate
7. Secure both assemblies by inserting (2) M4 x 25.4mm pan
head machine screws through the mounting plate and into the
slightly extended
through posts
of the exterior escutcheon
(Fig. 10).
Ensure that exterior escutcheon is vertically aligned.
Tighten securely with a #2 Phillips screwdriver.
Do not over-tighten.
6. Holding the exterior escutcheon flush to the door,
position the interior mounting plate by first routing the
wire harness through the mounting plate's 1/2"
rectangular hole below center hole (Fig. 9).
Figure 10
Through posts here
Figure 9
Interior of Door
Interior of Door
8. Finish routing the wire harness and connector
through the left upper slot, then behind center rib (Fig. 11).
Interior of Door
Figure 11
