6
P/N LT-503200 Rev B
1. Install latch in door, securing with two (2) M4 x 25.4mm
screws supplied (Fig. 1).
2. Install strike on the door frame, using two (2) M4 x 25.4mm
screws supplied, making sure to allow for the latch to be
centered
in the strike.
Figure 1
Install Latch
Exterior Escutcheon
(with gasket)
Do not remove clip from Exterior Escutcheon shank until correct handing has
been determined and Exterior Lever Handle is to be installed.
(See pages 10-11)
Clip
Shank
NOTE: RED marking
indicates "top" of hub
Square Drive Tube
is marked (WHITE)
to indicate "top"
NOTE
: The "tops" of both the square drive tube (which houses the tailpiece) and the
hub (in the shank) are
marked
(Figures 2 & 3) to indicate their orientation for
proper installation.
Shank
Figure 2
Figure 3
Exterior of Door
Clip
Install Exterior Escutcheon
Tailpiece
(horizontal)
(4) M4 x 25.4mm
Flat Head
Combination Screws
