8
80-0180-339, Rev 2
Wire the PS-SE to the Exit Devices
NOTE:
The maximum length listed with each wire gauge must never
be exceeded.
1. WIRE the PS-SE to the exit devices using the information in Table 3,
“Wire Gauge and Lengths.”
Table 3. Wire Gauge and Lengths
Maximum Cable Length
Wire Gauge
0
–300 feet
18 AWG
300
–600 feet
16 AWG
600
–900 feet
14 AWG
Figure 4. Exit Device Wiring
Install the PS-SE
1. INSTALL the PS-SE close to the exit device (door) operated.
NOTE 1:
Mounting holes are ¼” in diameter.
NOTE 2:
Enclosure dimensions are 10” wide by 10” long by 4” high.
2. FASTEN the PS-SE securely to the wall using the mounting holes
located on the back of the enclosure.
Install the Battery Backup System (BBK-SE)
1. ORDER the BBK-SE Battery Backup System Kit and two 12V, 7 AH
batteries (e.g., EverOn EVA12-7.5F batteries or equivalent) in order
to install the BBK-SE in the PS-SE enclosure.
