ASROCK H77 Pro4-M Page 62 User Manual Download

Page: 62 / 71

3.5 Hardware Health Event Monitoring Screen

In this section, it allows you to monitor the status of the hardware on your system,

including the parameters of the CPU temperature, motherboard temperature, CPU

fan speed, chassis fan speed, and the critical voltage.

CPU Fan 1 & 2 Setting

This allows you to set CPU fan 1 & 2’s speed. Confi guration options: [Full

On] and [Automatic Mode]. The default value is [Full On].

Chassis Fan 1 Setting

This allows you to set chassis fan 1’s speed. Confi guration options:

[Full On], [Automatic Mode] and [Manual]. The default value is [Full On].

Chassis Fan 2 Setting

This allows you to set chassis fan 2’s speed. Confi guration options:

[Full On] and [Manual]. The default value is [Full On].

Over Temperature Protection

Use this to enable or disable Over Temperature Protection. The default

value is [Enabled].

Summary of Contents for H77 Pro4-M







































































Search results

Summary of Contents for H77 Pro4-M

Reviews:

Related manuals for H77 Pro4-M

Brands by name

Popular brands

ASROCK H77 Pro4-M, User Manual

Search results

Summary of Contents for H77 Pro4-M

Reviews:

Related manuals for H77 Pro4-M

Brands by name

Popular brands