ASROCK H77 Pro4-M Page 38 User Manual Download

Page: 38 / 71

2.12 Serial ATA (SATA) / Serial ATA2 (SATA2) Hard Disks Installation

This motherboard adopts Intel

H77 chipset that supports Serial ATA (SATA) / Serial

ATA2 (SATA2) hard disks and RAID (RAID 0, RAID 1, RAID 5, RAID 10, Intel Rapid

Storage and Intel Smart Response Technology) functions. You may install SATA /

SATA2 hard disks on this motherboard for internal storage devices. This section will

guide you to install the SATA / SATA2 hard disks.

STEP 1: Install the SATA / SATA2 hard disks into the drive bays of your chassis.

STEP 2: Connect the SATA power cable to the SATA / SATA2 hard disk.

STEP 3: Connect one end of the SATA data cable to the motherboard’s SATA2 con-

nector.

STEP 4: Connect the other end of the SATA data cable to the SATA / SATA2 hard

disk.

2.13 Serial ATA3 (SATA3) Hard Disks Installation

This motherboard adopts Intel

H77 chipset that supports Serial ATA3 (SATA3) hard

disks and RAID (RAID 0, RAID 1, RAID 5, RAID 10, Intel Rapid Storage and Intel

Smart Response Technology) functions for SATA3_0 and SATA3_1 connectors. It

also adopts ASMedia ASM1061 chipsets that supports Serial ATA3 (SATA3) hard

disks for SATA3_A0 and SATA3_A1 connectors. You may install SATA3 hard disks

on this motherboard for internal storage devices. This section will guide you to install

the SATA3 hard disks.

STEP 1: Install the SATA3 hard disks into the drive bays of your chassis.

STEP 2: Connect the SATA power cable to the SATA3 hard disk.

STEP 3: Connect one end of the SATA data cable to the motherboard’s SATA3 con-

nector.

STEP 4: Connect the other end of the SATA data cable to the SATA3 hard disk.

Please be noted that SATA3_A0 and SATA3_A1 do not support RAID func-

tion. If you want to use RAID function on SATA3 connectors, please use

SATA3_0 and SATA3_1 connectors.

Summary of Contents for H77 Pro4-M







































































Search results

Summary of Contents for H77 Pro4-M

Reviews:

Related manuals for H77 Pro4-M

Brands by name

Popular brands

ASROCK H77 Pro4-M, User Manual

Search results

Summary of Contents for H77 Pro4-M

Reviews:

Related manuals for H77 Pro4-M

Brands by name

Popular brands