ASROCK H77 Pro4-M Page 55 User Manual Download

Page: 55 / 71

3.4.3 South Bridge Configuration

Onboard HD Audio

Select [Auto], [Enabled] or [Disabled] for the onboard HD Audio feature. If

you select [Auto], the onboard HD Audio will be disabled when PCI Sound

Card is plugged.

Front Panel

Select [Auto] or [Disabled] for the onboard HD Audio Front Panel.

On/Off Play

Use this item to enable or disable On/Off Play Technology. The default

value is [Enabled]. When On/Off Play is enabled, Deep Sleep will be dis-

abled. If you want to enable Deep Sleep, please disable On/Off Play fi rst.

Onboard HDMI HD Audio

This allows you to enable or disable the Onboard HDMI HD Audio feature.

Onboard LAN

This allows you to enable or disable the Onboard LAN feature.

Deep Sleep

Mobile platforms support Deep S4/S5 in DC only and desktop platforms

support Deep S4/S5 in AC only. The default value is [Enabled in S5].

Restore on AC/Power Loss

This allows you to set the power state after an unexpected AC/power loss.

If [Power Off] is selected, the AC/power remains off when the power

recovers. If [Power On] is selected, the AC/power resumes and the

system starts to boot up when the power recovers.

Good Night LED

Use this item to enable or disable Power LED and LAN LED.

Summary of Contents for H77 Pro4-M







































































Search results

Summary of Contents for H77 Pro4-M

Reviews:

Related manuals for H77 Pro4-M

Brands by name

Popular brands

ASROCK H77 Pro4-M, User Manual

Search results

Summary of Contents for H77 Pro4-M

Reviews:

Related manuals for H77 Pro4-M

Brands by name

Popular brands