ASROCK H67M-ITX User Manual Download

Page: 55 / 61

3.4.8 USB Configuration

USB 2.0 Controller

Use this item to enable or disable the use of USB 2.0 controller.

USB 3.0 Controller

Use this item to enable or disable the use of USB 3.0 controller.

Legacy USB Support

Use this option to select legacy support for USB devices. There are four

confi guration options: [Enabled], [Auto], [Disabled] and [UEFI Setup Only].

The default value is [Enabled]. Please refer to below descriptions for the

details of these four options:

[Enabled] - Enables support for legacy USB.

[Auto] - Enables legacy support if USB devices are connected.

[Disabled] - USB devices are not allowed to use under legacy OS and

UEFI setup when [Disabled] is selected. If you have USB compatibility is-

sue, it is recommended to select [Disabled] to enter OS.

[UEFI Setup Only] - USB devices are allowed to use only under UEFI

setup and Windows / Linux OS.

Legacy USB 3.0 Support

Use this option to enable or disable legacy support for USB 3.0 devices.

The default value is [Disabled].

Summary of Contents for H67M-ITX





























































Search results

Summary of Contents for H67M-ITX

Reviews:

Related manuals for H67M-ITX

Brands by name

Popular brands

ASROCK H67M-ITX, User Manual

Search results

Summary of Contents for H67M-ITX

Reviews:

Related manuals for H67M-ITX

Brands by name

Popular brands