ASROCK H67M-ITX User Manual Download

Page: 57 / 61

Setup Prompt Timeout

This shows the number of seconds to wait for setup activation key.

65535(0XFFFF) means indefi nite waiting.

Bootup Num-Lock

If this item is set to [On], it will automatically activate the Numeric Lock

function after boot-up.

Full Screen Logo

Use this item to enable or disable OEM Logo. The default value is

[Enabled].

AddOn ROM Display

Use this option to adjust AddOn ROM Display. If you enable the option

“Full Screen Logo” but you want to see the AddOn ROM information

when the system boots, please select [Enabled]. Confi guration options:

[Enabled] and [Disabled]. The default value is [Enabled].

Boot From Onboard LAN

Use this item to enable or disable the Boot From Onboard LAN feature.

Boot Failure Guard

Enable or disable the feature of Boot Failure Guard.

Boot Failure Guard Count

Enable or disable the feature of Boot Failure Guard Count.

3.6 Boot Screen

In this section, it will display the available devices on your system for you to confi g-

ure the boot settings and the boot priority.

Summary of Contents for H67M-ITX





























































Search results

Summary of Contents for H67M-ITX

Reviews:

Related manuals for H67M-ITX

Brands by name

Popular brands

ASROCK H67M-ITX, User Manual

Search results

Summary of Contents for H67M-ITX

Reviews:

Related manuals for H67M-ITX

Brands by name

Popular brands