ASROCK H67M-ITX User Manual Download

Page: 36 / 61

Caution

1. Without SATA 15-pin power connector interface, the SATA / SATAII / SATA3 Hot

Plug cannot be processed.

2. Even some SATA / SATAII / SATA3 HDDs provide both SATA 15-pin power

connector and IDE 1x4-pin conventional power connector interfaces, the IDE

1x4-pin conventional power connector interface is defi nitely not able to support

Hot Plug and will cause the HDD damage and data loss.

SATA 7-pin

connector

1x4-pin conventional

power connector (White)

connect to power supply

2.15 SATA / SATAII / SATA3 HDD Hot Plug Feature and Operation
Guide

This motherboard supports Hot Plug feature for SATA / SATAII / SATA3 HDD in

RAID / AHCI mode. Please read below operation guide of Hot Plug feature carefully.

Before you process the SATA / SATAII / SATA3 HDD Hot Plug, please check below

cable accessories from the motherboard gift box pack.

A. 7-pin SATA data cable

B. SATA power cable with SATA 15-pin power connector interface

The SATA 15-pin power

connector (Black) connect

to SATA / SATAII / SATA3 HDD

Points of attention, before you process the Hot Plug:

1. Below operation procedure is designed only for our motherboard, which

supports SATA / SATAII / SATA3 HDD Hot Plug.

* The SATA / SATAII / SATA3 Hot Plug feature might not be supported by the

chipset because of its limitation, the SATA / SATAII / SATA3 Hot Plug support

information of our motherboard is indicated in the product spec on our

website: www.asrock.com

2. Make sure your SATA / SATAII / SATA3 HDD can support Hot Plug function from

your dealer or HDD user manual. The SATA / SATAII / SATA3 HDD, which cannot

support Hot Plug function, will be damaged under the Hot Plug operation.

3. Please make sure the SATA / SATAII / SATA3 driver is installed into system

properly. The latest SATA / SATAII / SATA3 driver is available on our support

website: www.asrock.com

4. Make sure to use the SATA power cable & data cable, which are from our

motherboard package.

5. Please follow below instructions step by step to reduce the risk of HDD crash

or data loss.

A. SATA data cable (Red) B. SATA power cable

Summary of Contents for H67M-ITX





























































Search results

Summary of Contents for H67M-ITX

Reviews:

Related manuals for H67M-ITX

Brands by name

Popular brands

ASROCK H67M-ITX, User Manual

Search results

Summary of Contents for H67M-ITX

Reviews:

Related manuals for H67M-ITX

Brands by name

Popular brands