ASRock Industrial iEP-9010E, User Manual

Page: 33 / 76

iEPF-9010S-EY4 / iEPF-9012S-EY4
iEP-9010E / iEP-9012E
24 25
English
2.1.1 Control Panel Buttons and LED Indicators
Power Switch
Press the power switch button to toggle the system power-on and power-off modes. To
remove all power from the system completely, disconnect the power cord from the system.
ClearCMOS Button
Use this button to manually reset the system. Press and hold the reset switch for a few
seconds to reboot the system without shutting it off.
Remote Power On/Off Switch (IGN connector)
This switch is for ignition power control and operation. Use this switch to remotely
monitor or turn on/off the ignition signal for in-vehicle applications, for instance.
Ethernet Port LED
There are two LEDs on the LAN port. Please refer to the table below for the LAN port LED indications.
Activity / Link LED Speed LED
Status Description Status Description
Off No Link Off 10/100Mbps connection
Blinking Data Activity Orange 1000Mbps connection
On Link Green 2.5Gbps connection
PoE 1 Port Status LED
Status Description
Solid Green PoE 1 Port is connected to a PoE device
Off No PoE onnection
PoE 2 Port Status LED
Status Description
Solid Green PoE 2 Port is connected to a PoE device
Off No PoE connection
ACT/LINK LED
SPEED LED
LAN Port