45
AsCARD B5 & B56
OPTIONS:
I interpretation
IR interpretation and RS connection
The software versions are marked in the unit number.
The marking consists of:
2. WORKING CONDITIONS
Working conditions of electrocardiograph AsCARD B5 / AsCARD B56:
- tempe5 to + 40 °C
- relative humidity 25% to 95%
- the air should not be polluted with corrosion ingredients.
3. FEATURES
The electrocardiograph AsCARD B5 / AsCARD B56 allows the recording of 12 stan-
dard ECG leads. The following modes are possible:
•
1-channel manual record
this mode allows the recording of selected ECG lead. It is possible to set required
record speed, sensitivity, filters on/off: 50 Hz (power supply disturbances), 25 Hz, 35
Hz (muscular disturbances). It is possible to print one of 12 ECG leads I, II, III; aVR;
aVL; aVF; V1; V2; V3; V4; V5; V6; *
(available in AsCARD B5 only).
•
3-channel manual record
this mode allows the recording of selected ECG lead. It is possible to set required
record speed, sensitivity, filters on/off: 50 Hz (power supply disturbances), 25 Hz, 35
Hz (muscular disturbances). It is possible to print one of four ECG leads I-II-III, aVR-
aVL-aVF, V1-V2-V3, V4-V5-V6.
•
6-channel manual record
this mode allows the recording of selected group of leads. It is possible to set
required record speed, sensitivity, filters on/off: 50 Hz (power supply disturbances),
25 Hz, 35 Hz (muscular disturbances). It is possible to record one of two groups of
leads - limb : I-II-III-aVR-aVL-aVF and precardiac: V1-V2-V3-V4-V5-V6.
•
12-channel manual record
this mode allows to record 12 leads I-II-III-aVR-aVL-aVF-V1-V2-V3-V4-V5-V6. It is
possible to set required record speed, sensitivity, filters: 50 Hz (power supply distur-
