Aspect A-2000 BIS, Operating Manual

Page: 21 / 104

SECTION 2 INSTALLATION AND PREPARATION FOR USE
______________________________________________________________________
2-7
Front Panel Controls:
The [SILENCE] key toggles audible alarms on and off.
The left [
←
] and right [
→
] arrow keys are used to enter Review
mode and to scroll data backward and forward in time. In the BIS
Log, they show the previous [
←
] or next [
→
] screen of data.
The [MENU/EXIT] key is used to enter and exit the Setup Menu.
In Review mode it will return the user to the main screen. It is
also used to halt certain procedures, such as the sensor check,
and to answer "no" to a question.
The up [
↑
] and down [
↓
] arrows are used to move from one menu
selection to another. They are also used to increment and
decrement values. In the BIS Log, they are used to zoom time
out or in (increase or decrease reporting intervals).
The [SELECT] key is used to move between options within a
menu selection, to confirm an entry, and to answer "yes" to a
question.
Figure 5 Front Panel Controls
2.3.1.2 Power Button (Side Panel)
The power button is located on the lower right side of the monitor. It powers both the
monitor and the digital signal converter when the DSC is connected to the monitor. If a
power loss occurs, an internal back-up battery will supply power to the system.
The
back-up battery charges when the monitor is plugged into the AC supply and the
power is ON.
2.3.1.3 Rear Panel
The rear panel components are pictured in Figure 6. They include: the fan, clamp shoe,
potential equalization terminal, power cord receptacle with fuse holder, and the RS-232
serial port. A printer connection port is located on the bottom underside of the monitor.
Only an Aspect-supplied printer will function with this port.