Z4 DataTraq
9
Z4 DataTraq Configuration Functions
Function Options
00
Displays firmware version and date, and memory size
01
Sets allowed barcode symbologies
Code 128, Code 93, UPC/EAN, Code
39, Codabar, Interleaved 2 of 5,
UPC/EAN + supplementary codes, Full
ASCII Code 39, EAN-128, ITF-14
02
Output Emulation
IBM AT, PS/2 A, PS/2 B, IBM XT, AT
Type 2, RS-232, Scan Codes
Barcode terminator
None, CR, CR+LF, Tab
Reverse Shift
On or Off
RS-232 Echo
On or Off
Keypress Echo
On or Off
Loud Beeper
Loud or Normal
Output Quotes with SDF data
On or Off
03
Function 10 outputs free and used memory counts
On or Off
Output Codabar start/stop codes
Yes or No
Codabar start/stop codes in same set
Same or different
Codabar start/stop codes in upper case
Upper or lower case
Output UPC as 12 digits
12 or 13 digits
Expand UPC-E to UPC-A
Expand or don’t expand
Convert “978” EAN-13 to ISBN (SCIS)
Convert or don’t convert
04
Slow scan
Yes or no
Character delay
0 to 255 thousands of a second
CR delay
0 to 255 tenths of a second
Prefix characters
0 to 4 Ascii characters
Suffix characters
0 to 4 Ascii characters
Scan delay
0 to 255 tenths of a second
05
Keyboard delay
0 to 255 thousands of a second
RS-232 baud rate
300,600,1200,2400,4800,9600,19200
RS-232 number of data bits
7 or 8
RS-232 number of stop bits
1 or 2
06
RS-232 parity
Odd, Even or None
07
Outputs current configuration
08
Sets Z4 DataTraq to factory default configuration
09
Sets or clears function access password
10
Displays amount of memory used and amount free
11
Downloads data stored in memory
12
Downloads stored barcode reads one at a time when the enter key is pressed
13
Rewinds memory for use with Function 12 to go back to the first data stored in memory
14
Lists stored data on the Z4 DataTraq’s display
Press the numeric keys to list the
data more slowly (higher numbers) or
more quickly (lower numbers).
15
Duplicates Function 05 (for compatibility with older models)
18
Deletes the last barcode stored, if possible
19
Erases all data stored in memory
20
Allows time and date to be stored with each barcode scan
21
Allows the Z4 DataTraq’s clock/calendar to be set
22
Displays the time and date for a few seconds
23
Displays the number of scans made since storage memory as last erased
24
Displays the number of data records stored in memory
25
Allows a barcode “template” to be set
26
Displays the current template if one is set
28
Allows a unit number to be set
0 to 255.
29
Displays the barcode type and scan direction for the last barcode scanned
30
Lists the loaded custom program to the computer
31
Exits from a custom program.
32
Restarts a custom program.
39
Enters “calculator” mode
Press FUNC to return to normal mode.
Add and Multiply are on the comma
key, Subtract and Divide are on the
full stop key, Enter is the equals key.
50
Downloads storage memory to the computer 50 lines at a time
59
Sets the number of lines downloaded at a time with Function 50
1 to 255, 0 for default of 50 lines.