ASP LaserTraq, Manual

Page: 6 / 28

LaserTraq
4
LaserTraq General Overview
The following table presents a general overview of the LaserTraq keys and other
parts of the unit. Note that the actual usage of keys depends on the application
program.
Laser Engine
The Laser Engine produces the laser beam that
enables the unit to read bar codes
LCD Graphics Display
The LCD Graphics Display has a display area of
128 dots by 64 dots, or up to 8 lines of 16 characters
of text. The display also has a backlight to assist in
low light conditions.
Charge Points Allows the battery pack to be recharged in the
cradle.
Infrared Interface This is used for data communication in the cradle.
Battery Cover Housing main batteries and backup battery
Host Connector Used for data communication to the host machine
Indicator Shows the result of a read; RED means Good Read.
Red PW Key Turns the power on and off.
Orange SCAN Key Press this button to scan a barcode.
User defined keys The function of the E1 and E2 keys is defined by
the application program.
MENU/EXIT MENU returns to the Main Menu, EXIT quits the
current operation.
SHIFT Changes between numeric and letter input.
FNC Press this key to access the blue printed commands.
CAP Changes between upper and lower case letters.
Numeric Keys
These keys allow entry of numbers unless the FNC,
SHIFT or CAPS keys have been pressed.
BS/CLR
Backspaces one character, or clears input.
YES/LOCK
Inputs Yes at prompts, or locks all keys except
SCAN, LOCK and PW.
EDIT/BL
Allows data to be edited, or turns on backlight.
Å
/UP
Moves cursor left, or moves cursor down.
RPL/DEL
Replaces current data with new data, or deletes data.
NO/INS
Inputs No at prompts, or inserts new data.
Æ
/DOWN
Moves cursor right, or moves cursor down.