ASP LaserTraq, Manual

Page: 19 / 28

LaserTraq 17
Browse
The browse function allows you to examine the stocktake data stored in
memory, and to delete records if required. At the top of the screen, the
current record number and the number of records stored in memory is
displayed, in the form
–5/9- , where the first number is the current record
number.
You can use the
Õ
and
Ö
arrow keys (at the bottom left of the keypad) to
move around the records stored in memory, and the DEL/RPL key can
be used to delete the currently displayed record. Care should be taken
when browsing, because there is no confirmation when deleting records.
To exit the browse function and return to the Main Menu, press the
MENU key.
Query
This function allows you to scan or enter a barcode number, and the unit
then searches memory for the barcode number and displays the matching
record. If there is more than one matching record, the
Õ
and
Ö
arrow
keys can be used to move between them.
To exit the query function and return to the Main Menu, press the MENU
key.
Download
The Download function allows a database to be loaded into the
LaserTraq from the PC. This facility is not used in this program.
2. Send
When you enter the Send function, you will be presented with the
following display:
P r e s s a k e y
t
o S e n d
At this prompt, you can press the MENU key to return to the Main
Menu, or any other key to start the download. The stocktake program
uses the standard xmodem checksum download protocol, which is
supported by almost every communications or terminal program, such as
HyperTerminal that comes with the Windows operating system.