Dynamix DW-01Plus/H Gateway User Manual
- 52 -
users configure this for 1.
Only support FXO
.
-
Delay to add DTMF (FXO)
: The timer for sending DTMF signal, if the calls
are from the IP to PSTN side. It could only support the one-stage-dialing
function.
Only support FXO
.
-
Auto connect time (FXO):
The FXO will send the connect message to the IP
side is this timer is up in the one-stage-dialing function. It could only support
the one-stage-dialing function.
Only support FXO
.
-
FXO type
: Users could configure the calls need the 2
nd
stage dialing or not.
Only support FXO
.
-
Hardware Type
: This will show the hardware detection type.
Note:
The default value is to auto detect hardware type. Usually it is not necessary
to change this setting. Please make sure about your Hardware Type, Gateway
may be not functional if set wrong hardware type.
Summary of Contents for Dynamix DW-01Plus/H
Page 1: ...1 ...
