Dynamix DW-01Plus/H Gateway User Manual
- 42 -
-
IP Address:
Set WAN IP Address of Dynamix DW-01Plus/H.
-
Subnet Mask:
Set the Subnet Mask of Dynamix DW-01Plus/H
-
Default routing gateway:
Set Default routing gateway of Dynamix DW-01Plus/H
-
DHCP server
: The DHCP server IP address.
-
DHCP Server switch
: Enable the DHCP function for the LAN interface.
-
NAT function switch
: To enable or disable the NAT function.
-
LAN port IP for NAT
: To configure the LAN port IP for the NAT device.
-
DNS Server Obtained:
If the IP mode is DHCP mode, the DNS is obtained from
the DHCP server, user cannot change the DNS IP address. But if users
configure this option to manual, they can change it.
-
DNS Primary:
Set Primary Domain Name Server IP address.
User can set Domain Name Server IP address. Once Dynamix DW-01Plus/H
can connect with DNS server, user can specify URL address instead of IP
address for GK and phone book IP address.
-
DNS Secondary:
Set Secondary Domain Name Server IP address.
-
HTTP Port:
To configure the HTTP port for access this unit from the remote
side.
-
SNTP:
Enable / Disable the Simple Network Time Protocol function
-
SNTP Server Address:
Set SNTP Server Address
When SNTP server is available, enable Dynamix DW-01Plus/H SNTP function
to point to SNTP server IP address so that Dynamix DW-01Plus/H can get
correct current time.
-
GMT:
Set time zone for SNTP Server time
User can set different time zone according to the location of Dynamix DW-
01Plus/H. For example, in Taiwan the time zone should be set as 8,which
means GMT+8.
-
IP Sharing:
Enable it if Dynamix DW-01Plus/H is behind IP Sharing router.
-
IP Sharing Server Address
: Enter the WAN IP address of the IP sharing device
if it is the fixed ip.
-
IP Change:
Enable this function if the WAN IP address of the IP sharing device
is dynamic address.
-
PPPoE User Name
: To configure the user name for the PPPoE connection.
-
PPPoE Password
: To configure the password for the PPPoE connection.
-
PPPoE IP Address
: In the PPPoE mode, this table will show the ip address that
this unit gets from the ISP.
-
PPPoE Destination
: In the PPPoE mode, this table will show the default
gateway address that this unit gets from the ISP.
-
PPPoE DNS primary
: In the PPPoE mode, this table will show the DNS ip
address that this unit gets from the ISP.
Summary of Contents for Dynamix DW-01Plus/H
Page 1: ...1 ...
