34
Network type
Master/Slave:
Select this to enable the wireless function for which it may function
under a wireless connection infrastructure such as an Access Point.
Ad-Hoc:
Select this to enable a point-to-point connection to a computer.
Host-AP:
Select this to allow devices such as computers or mobile phone with Wi-Fi
connectivity in order to setup directly the camera without connecting it to an Access
point.
SSID
Choose a Wireless network from the SSID table, and type the SSID in the box. The
SSID is case-sensitive.
Security
The encryption will depend on whether the Access Point (Wireless Router) utilizes an
encryption key to authorize and authenticate client connections to access the wireless
service.
Select the security mode to match the Wireless network. It supports “None”, “WEP”,
“WPA-PSK”, “WPA2-PSK” security encryption based on the setting of Router.
Network Setting
The default HTTP port number 80 can be changed according to the user’s need. This
is useful for simple security port mapping.
DHCP Service
If the Access Point (Wireless Router) provides DHCP service, using DHCP, this
device will get all network parameters from the router automatically.
Static IP Address
Assign IP address, subnet mask, gateway, and DNS manually.
IP Address:
Specify a unique IP address for your network camera.
Netmask:
Specify the mask for the subnet the network camera.
Gateway:
Specify the IP address for the Gateway.
After set up, click [Save] to save the settings.
