27
5.2.3 PTZ
Enable PTZ
Enable the PTZ control on the connected analog PTZ device. Once this function is
appropriately configured, the Live View page will display the control panel for the
installed PTZ device.
Protocol
Select one from the list of protocols, only Pelco D is available currently.
ID
Select ID of the analog PTZ device to control.
Speed
Select the PTZ speed (1 – 10).
Baud rate / Data bit / Stop bit / Parity / Flow control
Depending on protocol used, the values are assigned accordingly.
After set up, click [Apply] to save the settings.
