36
Trigger Event List
Displays the current Event List saved permanently in memory.
Add:
In order to turn on the capability of setting an Event, click on
[Add]
button to add
the available options. Note: the maximum number of events is limited to 10.
Delete:
In order to remove any existing event, click on the name of the Event and click
on
[Delete]
button.
Trigger Event Setup
General Settings
Event Name:
Input a name to identify the Event that will perform the action upon
some event occurrence.
Trigger by (Condition):
Continuous Trigger:
The trigger condition is always on.
Motion Detection:
It will perform an action upon a motion is detected. Select
which Motion Detection area should be detected.
Manual Trigger:
Sets the trigger event to be activated manually from the Live
View page. The activation is done by a click on the icon of Manual Trigger.
GPIN:
It will perform an action when the Digital Input is triggered. Select
which Digital Input should be detected.
By Boot:
It will perform an action when the camera is booted or restarted.
This feature is useful to detect reconnections that are not anticipated or
expected.
When IP Change:
Makes a notification when the IP address of the camera
changes.
Trigger Time Settings
Always Trigger:
Always keep the Network Camera alert to wait for some condition to
happen.
Set the trigger execution time:
It will perform the action only for the time frame set.
Drag the mouse upon the day and time to set the desired time.
Stop Trigger:
Don’t do anything while activated. In other words, even if the condition
has happened the Network Camera shall not do anything.
When Triggered... (Do some action when event is triggered)
Upload Images:
