41
Note
: if you enter a different value other than 80 for your HTTP port, you can not return to the Live View
screen. In order to return to the Live View screen, please launch IP Discovery tool again and select your
network camera.
RTSP
The RTSP protocol allows a connecting client to start an H.264/MJPEG stream. Check the box to enable
the server and enter the RTSP port number to use. The default setting is 554.
Note:
that H.264/MJPEG video streams will not be available if this service is not enabled.
FTP
The FTP server running in the network cameras enables the upload of new firmware, and user
applications. Check the box to enable the service.
UPnP Setting
First, tick the box “Enable UPnP” (actually, it’s ticked in factory default)
.
Arp / Ping
Enabling Arp / Ping will offer an additional tool to the user in order to detect the status of the Network
Camera. For related commands to ARP/Ping, refer to your Network Administrator.
