6
309420
Grounding and Electric Requirements
D
Ground solvent pails used when flushing
. Follow local code. Use
only conductive, metal pails, placed on a grounded surface such as
concrete. Do not place the pail on a non–conductive surface such
as paper or cardboard, which interrupts the grounding continuity.
ti5850a
ti5851a
D
Ground the metal pail
by connecting a ground wire to the
pail by clamping one end to pail and the other end to
ground such as as water pipe.
D
Maintain grounding continuity
when flushing or
relieving pressure by holding metal part of spray gun
firmly to side of a grounded metal pail, then trigger gun.
Thermal Overload
D
Motor has a thermal overload switch
to shut itself down if overheated.
To reduce risk of injury from motor staring
unexpectedly when it cools, always turn power
switch OFF if motor shuts down.
Summary of Contents for Zip-Spray-n-Roll 233792
Page 46: ...46 309420 Notes ...
