ASL INTERCOM T9 PRO, Owner'S Manual

Page: 20 / 28

18 - T9 PRO
ASL MACHINES USA 2018 ©
Equipment Operation Method
[1]: Prior to starting machine, check to ensure the throttle stage is set to the STOP position.
[2]: First adjust the handle in the line-style, and then hold the handle and with one foot stepping on
the step bar and press downwardly; after the equipment is fixed on the ground, check whether the
external parts are complete, whether there is any wrong installation of tools, neglected installation
and loose parts. Immediately solve the problem if finding these issues.
[3]: After checking, press the equipment down until the chassis touch the ground, and lay it flat.
[4]: Apply grinding tooling onto the equipment, and the basic steps on the following page:
(1) As shown in Figure 1, the equipment chassis is loaded with a polishing plate
(2) Place desired tooling on machine utilizing the magnetic plates.
(3) After loading, check whether the parts are complete once again.
(4) Install or tighten the handle, clockwise rotate the black rotary handle to the tightest state.
Rotate in the reverse direction when dismounting the handle as shown in Figure 3.
FIGURE 1 FIGURE 2
[5]: Always ensure prior to starting that the machine contains the proper amount of motor oil by
checking the oil level as shown in figure #3 Below by the red arrow. Also check the propane to ensure
flawless operation.
FIGURE 3 FIGURE 4