3
GENERAL
Please read the instruction manual and save it for future reference.
•
Please do not use the washing machine if you have not read and
understood these instructions or use
fi
rst.
• Failure to observe the instructions for use or inappropriate use of the
washing machine may result in damage to the laundry or machine, or injury
to the user. Keep the instruction manual handy, near the washing machine.
• Instructions for use are available on our website at www.asko.com.
•
Your washing machine is intended solely for household use.
• The appliance has to be connected to the water and power supply by a
trained expert.
• Any repair and maintenance pertaining to safety or performance should be
done by trained experts.
• To avoid hazard, damaged power cord may only be replaced by the
manufacturer, authorized service technician, or other authorized person.
• After installation, the washing machine should stand still for two hours before
it is connected to the power mains.
• The washing machine may not be connected to the power mains using an
extension cord.
• Do not connect the washing machine to an electrical outlet intended for an
electric shaver or hair dryer.
• To connect the washing machine to water supply, make sure to use the
supplied water supply hose and gaskets. Water pressure has to be between
0.1 and 1 MPa (approximately 1–10 kp/cm
2
, 10–100 N/cm
2
).
• Always use a new water supply hose to connect the appliance to water
supply; do not reuse an old water supply hose.
•
After the washing cycle, close the water tap and pull out the washing
machine plug from the power socket.
• Only use the washing machine for washing laundry, as described in the
instruction manual. The machine is not intended for dry cleaning.
• In case of incorrect appliance connection, incorrect use, or servicing by an
unauthorized person, the user shall bear the cost of any damage.
• Only use detergents intended for the washing machine!
• Only use agents for machine washing and care of laundry. We shall not be
responsible for any damages or discolouration of gaskets and plastic parts
resulting from incorrect use of bleaching or colouring agents.
SAFETY PRECAUTIONS