23
STEP 7:
START THE WASH
Close the washing machine door and press the
Start
/Pause/Stop button.
Start (short press of the button – start/resume)
Pause (short press of the button – pause)
Stop (press and hold for 3 seconds – stop or cancel)
Starting
2:20
Remaining time
Depending on the selected program, anticipated washing time will be displayed in hours and minutes.
Actual washing time will depend on the selected program, load, type of laundry, spin speed etc.
Actual washing time may be longer or shorter than initially displayed.
Remaining time will be updated during the program duration, depending on the actual amount of laundry
and amount of water pumped into the machine. The last remaining time update takes place before the
fi
nal
spinning cycle.
In case of uneven distribution of laundry, the time on the display will
fl
ash and it will not count down.
Once the laundry is evenly redistributed, the washing time will continue and it will stop
fl
ashing.
Washing
2:20
Adding or removing laundry after the start of the program
Paused
Stop program
Add clothes
5
To add or remove laundry during the
progress of a washing program, use the
Start/
Pause
/Stop button to pause the
program. Then, press the button 5 to
select "Add clothes".
The door may be opened when the water is pumped from the machine. Then, add or remove the laundry.
Close the door and continue the program. Press the
Start
/Pause/Stop button.
The program will resume from the point at which it was interrupted.
Door can not be opened due to high temperature - please restart.
If the door cannot be opened, it is
possible that the temperature in the
machine is too high.
The result will not be satisfying adding clothes this late - please start.
Also, if the door cannot be opened, it
is possible that the program has been
running for too long and any laundry
added at that point would not be
e
ffi
ciently washed.
