37
FAULT CODE LIST
Describes the relevant fault codes for this product.
Nr.
Name
Description
FAULT 03
Fault in moisture
sensor
Sensor is outside its range
FAULT 04
Maxtid process
Maximum time for drying process
exceeded (the preset value 180 min can
be changed using parameter P 2073).
FAULT 06
Check water pump
The high water level in the tray has
activated the switch for the float.
FAULT 12
Timeout
communication
The communication between the user
interface and electronics has been
temporarily interrupted.
To reset the alarm, press and hold the
START/STOP
button for 5 seconds.
