27
■
PROGRAMME END
When the cooling period has ended, the drying process is finished, and the display
shows the text
“END”
(flashing).
When the START/STOP button is pressed after the door is opened, the current
programme is stopped and the display shows the most recently used programme.
SETTING THE DRYING PROGRAMME
NB!
In waiting mode the display goes off
after 15 min and lights up again when
any of the buttons on the control
panel is activated or the door is
opened.
NB!
Empty the condensation water tank
after each drying process.
Stopping the drying programme
To discontinue a drying process in progress, press
START/STOP.
The door is opened
If the door is opened when the drying process is under way, the drying process
will continue for a further 5 minutes. The display will show
“CLOSE DOOR”
and a
programme pause period of 5 minutes will be counted down.
If the door is closed within this 5 minute period, the drying process continues.
If the door is left open, the drying process is discontinued after 5 minutes and has to
be re-started manually.
If you wish to discontinue the drying process immediately, without a 5 minute
period, press
START/STOP.
