ashtech Z-eurocard, Operation Manual

Page: 42 / 46

32 Z-Sensor and Z-Eurocard Operation Manual
RAW data Raw Data Output Status OFF in all ports
Raw data format Raw Data Output Format ASCII in all ports
Serial Port Baud Rate Serial Ports Baud Rate Selection 9600 in all ports
RTCM MODE RTCM Differential Mode Selection OFF
RTCM PORT RTCM Differential Mode Port Selection A
AUT Automatic Differential/Autonomous
Switching when RTCM Differential Mode
Enabled N
RTCM SPD RTCM Differential BPS Speed Setting 0300
STI RTCM Base or Remote Station ID Setting 0000
STH RTCM Base Station Health Setting 0
MAX Maximum Age for old RTCM Corrections to
be Used 0060
QAF RTCM Communication Quality Setting 100
SEQ Use Sequence Number of RTCM Correction
in Remote Station N
TYPE RTCM differential Messages Enabled and
Output Frequency of the Enabled Messages 1 = 99, 6 = ON, remaining
messages 00
RTCM EOT End of Character Selection for RTCM
Corrections CRLF
MSG Text for RTCM type 16 message empty
CPD MODE CPD Mode Selection Disabled
PED DBEN Output Transmission Period 001.0
DBEN PORT Output Port For DBEN messages in the Base B
CPD EOT End of Character Selection for CPD
Corrections CRLF
AFP Setting of Ambiguity Fixing Confidence
Level 099.0
MAX AGE Maximum age of corrections for CPD 30
DYN CPD Rover Mode Dynamic Operation WALKING
POS Output CPD
MTP Level of multipath Selection MEDIUM
CPD POS Reference Position of the other Receiver RECEIVED
FST Fast CPD Mode Selection ON
CPD PER CPD Update Interval 01
ANT radius Radius of the Antenna 0.0000
Table 3.1: Default Values (continued)
Parameter Description Default