ashtech Z-eurocard, Operation Manual

Page: 41 / 46

Getting Started 31
G
et
tin
g Start
ed
Session Programming Session Programming Default Parameters INUSE flag = N
REF day = 000
OFFSET = 00:00
For all Sessions:
Session Flag = N
Start Time = 00:00:00
End Time = 00:00:00
RCI = 20
MSV = 3
ELM = 10
RNG = 0
MDM Modem Parameters MODE=OFF
TYPE = 0 (US Robotics)
PORT = B
BAUD RATE = 38400
BEEP Warning beep Off
CTS Clear to send port setting On
LPS Loop parameter setting 01, 2, 3
MET meteorological parameter setting All ports off
INIT-STR:No
TRIG-CMD:*0100P9
INTVL:5
TLT Tilt Meter parameter setting All ports OFF
INIT-STR:No
TRIG-CMD:*0100XY
INTVL:1
NMEA messages NMEA Message Output Status OFF in all ports
PER NMEA Messages Output Rate 001.0
RCI Raw Data Output Rate 020.0
MSV Minimum Number of SV’s for Raw Data
Output 03
ELM Elevation Mask for Raw Data Output 10
REC Record Data Flag (N/A) E
MST Minimum Number of SV’s for Kinematic
Operation 0
ANH Antenna Height (before session) 00.0000
ANA Antenna Height (after session) 00.0000
SIT Site ID Name ????
EPG Kinematic Epoch Counter 000
RNG Ranger Mode Selection (N/A) 0
Table 3.1: Default Values (continued)
Parameter Description Default