3
1. Tie a piece of medium weight yarn approx.
1.5 metres (5 feet) long, called a leader to the
bobbin on the e-Spinner Super Jumbo.
2.
Thread the leader through the flyer yarn guide
with the black insert and out through the orifice.
Locate 2 bobbins of spun yarn onto the Lazy Kate
Super Jumbo rods and tie the 2 strands of yarn to
the leader.
3.
Adjust the tilt of the base rail so the yarn feeds
easily off the bobbins.
5.
Allow the leader and your spun yarn to start
feeding in. Use the least amount of leather brake
band tension possible.
6.
To fill the bobbin evenly, squeeze and slide
the yarn guides along the flyer arms.
For further plying information refer to “The
Ashford Book of Hand Spinning” by Jo Reeve, a
116-page book full of ideas and inspirations for
spinners.
Plying
4.
Check the SPIN/PLY switch is on PLY (up) and
the SPEED control is on SLOW. Switch the ON/OFF
switch to ON. Gradually turn the SPEED control
clockwise until the flyer starts to turn slowly.
Loosen
Le
ader 1.5m (5f
t)
