Page 23
5.5 Colour Kill (Monochrome)
Hold Key:
When in
photo mode only
the colour can be removed from the picture
by pressing and holding the camera button. Note that once a new mode
is selected the image will revert back to a coloured image the next time
photo mode is selected. This is to avoid confusion with the positive
reading mode. A colour kill symbol
will appear at the bottom right
hand corner of the screen when colour kill mode is selected. Press and
hold the same button to remove colour kill.
5.6 PC / Video Swap
Hold Key:
When in split mode the video and PC images can be easily swapped
around the split axis. To do this press and
hold
down the split button.
5.7 The Footswitch
The footswitch can be used to cycle between PC, camera and split
mode when pressed. This is useful for quick viewing of an image
without having to use the keypad.
5.8 Sound
To facilitate use of the function mode (see section 5.1) the User may
wish to turn sounds on. To do this press and hold the
and
buttons simultaneously for three seconds. At the end of this time you
will hear an audible beep to indicate that sounds are enabled. When the
Fn button is pressed a clicking sound will be made (along with the red
LED) to indicate that the unit is in function mode. When the function
mode times out after three seconds the sound will stop.
To turn off sounds simply press and hold the same buttons gain for
three seconds. An audible beep will indicate that sounds are now
turned off.
