background image

5

1.2 Videos

On the Asetek SimSports YouTube channel

(https://www.youtube.com/aseteksimsports)

, you will be able to find 

tutorial videos which, in detail, demonstrates numerous ways 
the pedals can be set up and used. You will also find additional 
information about the development and ambition for the Invicta 
Pedals.

1.3 Manual version

This manual is version 1.0.
You will always be able to find the latest version of the manual at 

https://www.asetek.com/simsports/product/invicta-pedals-clutch/ 

1.4 Support & Contact

Should you stumble upon further questions that are not covered 
in this manual or any of our detailed instruction videos, we 
encourage you to contact our friendly support staff at

[email protected] 

 

2. Product

2.1 Intended Use

Thank you for purchasing the Asetek SimSports Invicta Clutch 
pedal; you have made an excellent choice! Asetek SimSports 
Invicta pedals will bring you to the next level of your Sim Racing 
career. Whether you are a beginner or experienced gamer, you 
will feel the immersion of being in a real race car while racing the 
tracks across the globe in the virtual space. 

The Asetek SimSports Invicta Clutch pedal is designed to be 
used in competitive sim racing. The clutch can be directly 
connected to the Asetek SimSports Invicta Brake & Throttle, 
with seamless and intuitive installation. The Asetek SimSports 
Invicta Brake & Throttle pedals can be bought in our webshop or 
at an Asetek SimSports authorized dealer. Do not use the pedals 
without mounting, for they may shift during use. 

Note: The clutch cannot be used as a standalone product

Recommended ages 15 and above.

The pedals are intended for indoor use only. 

Summary of Contents for Invicta Sim Racing Clutch





































Reviews: