Asetek Invicta Sim Racing Clutch, Manual

Page: 10 / 36

8
4. Getting Started
This section will teach you how to get your clutch set up and
running. Later in the manual, you will learn much more about the
fine-tuning and software.
4.1 Installing your Pedals
4.1.1 Tools Required
To mount the pedals in your cockpit, you will need the following
tools:
• Allen key, 3 mm (not included)
• Allen key, 5 mm (not included)
• Key wrench (not included)
Note: Use the allen keys supplied with the Asetek SimSports
Invicta Brake & Throttle
4.1.2 Optional Tools
Depending on your rig and mounting preference, you may also
need the following tools:
•
Pencil or marker
• Screwdriver
•
Power drill
4.1.3 Mounting to your Rig
The pedals are intended to be solely used while mounted to a
sim racing rig.
The clutch has two (2) mounting holes in fixed positions. As such,
all adjustments to the positioning of the base must be handled
by your rig.