25
3. Follow the on screen instructions
4. Done! Your calibration will carry over into all the supported
games.
Once your pedals are calibrated, only a few unique scenarios will
cause a need for recalibration:
a. If so desired, you have adjusted mechanical stop of your
clutch pedal.
b. If so desired, you have adjusted the static angle of your
clutch.
c. If so desired, you have moved the pivot bracket
5.4 Deadzone Adjustments
In RaceHub, you will be able to set both top and bottom
deadzones on all your pedals.
A bottom deadzone allows you to slightly activate your pedal
without engaging the clutch. For example, if you rest your foot
on the pedal. A top deadzone allows you to modify the point
of full activation. In the case of a clutch pedal, this would allow
you to reach 100% clutch before your clutch pedal reaches full
activation and the mechanical pedal stop. This preference is
individual and generally done by a race engineer before the car
goes on track. RaceHub allows you to fully customize it and we
strongly encourage you to do it as well.
The top and bottom deadzones can be adjusted using these
sliders marked here:
Summary of Contents for Invicta Sim Racing Clutch
Page 1: ...1 Invicta Sim Racing Clutch Manual ...
Page 34: ......
Page 35: ......
Page 36: ...34 ...
