Aseptico AEU-25 Operation And Maintenance Instruction Manual Download Page 3

Page: 3 / 20

Your new Aseptico Endo DTC

is one of the most advanced

units available to the dental profession. This system features

advanced digital torque control technology with auto-stop

reverse to help prevent file breakage in the canal, five

programmable memory buttons with an onboard file library, an

integrated calibration system, and the versatility of an

autoclavable 30,000 RPM brushless micro motor. These

features combine to make the perfect rotary file system for

endodontic and other dental procedures.

Congratulations!

This system is engineered to provide many years of reliable

service. Please read the instructions provided in this manual to

receive the best and longest service from your Aseptico

equipment.

Separate manuals may be provided to cover the operation and

maintenance of handpieces or other accessories for your unit.

PACKAGE CONTENTS

Electronic Control Console

Remote Power Cord

AE-4B-30 Autoclavable 30K Brushless Micro Motor

Autoclavable Motor Holder

AE-7P Foot Switch (971-S)

Summary of Contents for AEU-25





















Search results

Summary of Contents for AEU-25

Reviews:

Related manuals for AEU-25

Brands by name

Popular brands

Aseptico AEU-25, Operation And Maintenance Instruction Manual

Search results

Summary of Contents for AEU-25

Reviews:

Related manuals for AEU-25

Brands by name

Popular brands