LIMITED WARRANTY
The DS-824C is warranted against defects in workmanship and materials for two years from date of sale.
This warranty does not apply to damage resulting from accident, misuse, or alteration nor where connected
voltage is more than 5% above the configured operating voltage, nor to equipment improperly installed or
wired or maintained in violation of this Owner’s Manual. No other written or oral warranty applies. No
employee, agent, dealer or other person is authorized to give any warranties on behalf of ASE.
Units returned for warranty repair cannot be modified from shipped condition and leads must protrude a
minimum of 6 inches from the base conduit hub. Repair costs of a modified unit will be quoted as the unit
must be returned to the original, unmodified condition prior to return shipping. The customer shall be
responsible for all costs incurred in the removal or reinstallation and shipping of the product for repairs.
Within the limitations of this warranty, inoperative units should be returned, freight prepaid, to ASE, and we
will repair or replace, at our option, at no charge to you with return freight paid by ASE. It is agreed that
such repair or replacement is the exclusive remedy available from ASE and that ASE IS NOT
RESPONSIBLE FOR DAMAGES OF ANY KIND, INCLUDING INCIDENTAL AND CONSEQUENTIAL
DAMAGE. Some states do not allow the exclusion or limitation of incidental or consequential damages so
the above exclusion may not apply to you. The warranty gives you specific legal rights, and you may also
have other rights which vary from state to state.
AUTOMATED SYSTEMS ENGINEERING, INC.
2519 E SAINT VRAIN ST
COLORADO SPRINGS, COLORADO 80909
PHONE: 719-599-7477 FAX: 719-599-7482
Visit us on the Internet at: www.goase.com
Need Indoor Monitoring & Control?
Take a Look at the ASE CDP-2
Simple Installation & Operation at a Competitive Price
Visit www.goase.com for more information
CAUTION: Read all instructions carefully before installation.
Save this Installation Manual for future reference.
DS-824C
RAIN/SNOW SENSOR CONTROLLER
INSTALLATION MANUAL
RAIN/SNOW SENSOR CONTROLLER
AVERTISSEMENT: PAS POUR LE CONTRÔLE DE HAUTE TENSION
30 A 24V AC, 20 A 28V DC
22−28V AC/DC 500mA 50/60 Hz
ENCLOSURE TYPE 3R
CONTROL
INPUT
CONTROL SWITCH
STANDBY/RESET
MANUAL ON
AUTOMATIC
WARNING: NOT FOR HIGH VOLTAGE CONTROL
ACTIVATED
DS−824C
ENGINEERING
AUTOMATED
SYSTEMS
INDICATOR
POWER
OFF
Manufactured By
AUTOMATED
SYSTEMS
ENGINEERING
2519 East Saint Vrain St Colorado Springs, Colorado 80909
