Ascon tecnologic DY-5121, User Manual

Page: 39 / 50

Chapter 5 - Module Setup
33
5-4-3 Module information
The “Site Name” string can be used to add information about where the module is
located (address, building id etc.). The site name is shown left to the log out
button in the user interface header.
The “More information” field can be used to do notes about the installation.
5-5 Email Setup
The following configuration properties are available:
Sender - From field in the alarm mail. Example “DY - WebSCADA”
Reply path - The E-mail address to send a mail to when someone reply on an
alarm mail.
SMTP server - IP-number or domain name to the SMTP server that the module
should use when sending E-mails. If domain name is used make sure that you
have entered a DNS under the Network configuration.
SMTP Authentication
- Authentication method: Auto, plain, login or cram-MD5
- Username
- Password
5-5-1 SMTP Authentication
If the SMTP server require authentication you should enable SMTP
Authentication. There are several types of authentication methods supported by
the module:
auto - The module automatically select the best method supported by the SMTP
server.
plain - a simple non-encrypted method supported by most SMTP servers.
login - a simple non-encrypted method supported by most SMTP servers.
cram-md5 - a more secure login method where the username and password is
encrypted (this method is not supported by all SMTP servers).