Personalizing Your Phone
38
20321611en_ba_a0
Clearing a Key
You want to clear the assignment made to a configurable key.
The function "Clear key" is available for this purpose in the configuration mode.
Defining Functions
This section explains how to activate an individual function, for example call diversion, with the aid of
function commands and how to assign it to a key.
Function Commands
You can use function commands to define a function to suit your personal requirements. A function can
consist of one or more function commands, the function code and the phone number. You can either
carry out a function directly or store it under a key.
The following function commands are available (see "Entering characters"):
Examples of how to define a function:
Functions are carried out depending on the current status. There are two possible states: "In a call" and
"Not in a call" (see Table "*/# Procedures").
<long>
Press the configurable key and hold it down for a moment.
The display shows the key type.
/\
Press the "/\" Foxkey repeatedly until the display shows "CLEAR KEY".
OK
Press the "OK" Foxkey.
The key configuration is cleared.
"I"
Seize line
"X"
Disconnect
"P"
1 second pause before the next operation
"N"
Use the phone number entered in call preparation
"."
Control key function
"Z"
Activate/deactivate DTMF mode
"R"
Use the phone number last dialled
"IR"
Seize line ("I"),
dial phone number last dialled ("R")
"I201"
Seize line ("I") and dial phone number 201
"I*21201X"
Seize line ("I"),
activate call diversion ("*21") to phone number 201,
disconnect ("X")
Note
Text mode has to be activated before you can enter function commands.
All manuals and user guides at all-guides.com
