ASCO 5010 Remote Display Unit
33
Section 9.
Monitoring
The ASCO 5010 Remote Display Unit is used for configuring and monitoring the ASCO 5400 Series Power Quality Meter. This
section will describe and instruct on monitoring the ASCO 5400 Series Power Quality Meter using the ASCO 5010 RDU.
The default start up menu when powering up the ASCO 5010 RDU is the Main Menu shown in Figure 17. This menu is
comprised of icons pointing to the monitoring and configuration sub menus. Navigation between the icons is accomplished using
the navigation buttons as explained in Section 6 on page 13. When an icon is reached using the navigation buttons, an explanatory
description appears just above the function key tabs. For example, in Figure 17, the first icon from the upper left is activated, and
its name, "System Configuration" appears above the function key tabs. Table 3 explains each icon and what it accesses.
The following sections will describe the monitoring screens.
Figure 17: The Main Menu- Default on Power Up
Table 3: Main Menu Icon Key
Icon Menu
Name
Functionality
System configuration
Enter the configuration sub menus. See 8.4.1 on page 26
Meters
Enter the metering sub menus: Voltage, current, powers, and other electrical
parameters of interest
Oscilloscope
Enter the voltage and current waveform sub menu
Harmonics display
Enter the voltage and current harmonics sub menu
Phasors display
Enter the voltage and current phasor page
Energy measurement
Enter the Energy sub menu
