AT5200 FTTX Multiport EDFA
Solutions Provider for FTTx, RFoG, and HFC
www.ascentcomtec.com
Page 4 of 29
WARNING!
Exposure to class 1M laser radiation is possible. Access should be restricted to
trained personnel only. Do not view exposed fiber or connector ends when
handling optical equipment.
•
Ensure adequate cooling and ventilation as specified.
•
The installation and operation manual should be read and understood before units are put into use.
•
Always replace protective caps on optical connectors when not in use.
•
The typical connectors fitted are SC/APC 8°.
Note:
8° angle polished connectors must be used.
Cleaning
Use only a damp cloth for cleaning the front panel. Use a soft dry cloth to clean the top of the
unit.
Do not use spray cleaner of any kind.
Overloading
Overloading wall outlets and extension cords can result in a risk of fire or electric shock.
Use approved electrical cords.
Damage requiring service
Unplug unit and refer servicing only to Ascent Communication Technology qualified service
personnel.
Servicing
Do not attempt to service this unit yourself. Refer all servicing only to Ascent Communication
Technology qualified service personnel.
