18
1.5.2 DVR - Motion Detection Setup
Right click
->
“Main Menu”
->
“Event”
->
“Detect”
->
“Motion Detect”
Use the following settings for each camera channel you require to have motion
detection. Make sure the “Enable” box is checked then click the “Region Setup”
button.
Using the mouse, add or remove areas that you want motion detection. A
tranparent red mask is added to motion detection enabled areas. If no red mask is
shown that area will not detect motion.
When you move your mouse cursor to the top of the screen, motion detection
sensitivity and threshold settings appear. We recommend these settings:
Sensitivity=50 Threshold=10. You may set multiple zones with different thresholds
by clicking “1,2,3,or 4” at the top of the page.
