© Copyright 2010 ASAN Security Technologies Oy
www.asansecurity.com
Recorder Settings - Configuring a Manual trigger - 1
1. Add a manual trigger for an IP -device,
e.g., to activate a digital output or to
start manually recording. Select the
trigger on the
Triggers
tab.
2. Set the trigger type to
Manual trigger
.
3. Select the switch type: either
switch on
(signal stays high until switched off
again) or
triggering
(a short pulse to
signal high, and then back to low
again).
4. Select the
icon
to be shown for this
trigger.
5. Select also the icon location: on
Camera (
and surveillance view) or
Generic.
The generic triggers are
shown on the list on the right side of
the surveillance views and they can be
hidden.
6. If you selected on
Camera, s
elect the
camera on which the trigger icon will
show.
7. Save changes.
Manual trigger:
Manual trigger is a trigger that, e.g., launches a
digital output, or a manually starts recording from a camera. The
button (icon) controlling the trigger may be located on a camera
window, or on the list on the right side of surveillance views.
1
4
3
5
2
6
7
19